Comtech EF Data CDM-800, Installation And Operation Manual

Page: 78 / 130

CDM-800 Gateway Router Revision 1
Ethernet-based Remote Product Management MN-CDM800
5–18
5.4.4.3 Configuration Pages
Use the nested ‘Configuration’ pages to configure all unit parameters. Click the Interface , Mod ,
ARP , Routing , Compression , or WAN tab to continue.
5.4.4.3.1 Configuration | Interface
Click the FE Mgt , GE ‐ 1 , or GE ‐ 2 tab to continue.
5.4.4.3.1.1 Configuration | Interface | FE Mgt
Use this page to configure the rear panel ‘FE’ 10/100 BaseT Fast Ethernet M&C port.
Figure 5 ‐ 9. Configuration | Interface | FE Mgt Page
FE – Management Interface
The acceptable/valid operating ranges for items in this section are provided in parentheses.
•
MAC Address ( read ‐ only ) – The MAC Address cannot be changed.
•
IP Address / CIDR Mask (8 ‐ 30) – Use this box to enter the IP Address and CIDR ( C lassless
I nter ‐ D omain R outing) Subnet Mask.
•
Link Configuration – Use the drop ‐ down menu to select the line speed and duplex setting
for the CDM ‐ 800 FE interface. The available selections are:
o
Auto*
o
100 BaseT / Full Duplex
o
10 BaseT / Full Duplex
o
100 BaseT / Half Duplex
o
10 BaseT / Half Duplex