Comtech EF Data CDM-800, Installation And Operation Manual

Page: 73 / 130

CDM-800 Gateway Router Revision 1
Ethernet-based Remote Product Management MN-CDM800
5–13
The complete roster of FAST Accessible Options is as follows:
Option
Compression Hardware
Payload Compression Card (CEFD KIT P/N KT-0000249)
Tx Symbol Rate (VCM) Up to maximum 62 Msps
Tx Header Compression Enabled
Tx Payload Compression Enabled
QoS (Quality of Service) Group QoS
G.703 Clock Extension Enabled/Disabled
Tx Frequency IF (50-180 MHz) and L-Band (950-2150 MHz)
FAST Upgrade
Serial Number ( read ‐ only ) – The serial number of the unit is required by Comtech EF Data when
ordering FAST option upgrades. Take note of this number before contacting Comtech EF Data to
order a CDM ‐ 800 FAST option upgrade.
FAST Code – Once a FAST upgrade order is placed and confirmed, the Comtech EF Data sales
representative will provide a 20 ‐ digit FAST Access Code. To perform the CDM ‐ 800 FAST option
upgrade:
Step Task
1 Use the FAST Configuration table to view the currently installed features .
2 Write down the unit Serial Number provided in the FAST Upgrade section:
Serial Number: __________________________
3 Contact a Comtech EF Data sales representative during normal business hours:
•
Provide the unit Serial Number to the representative.
•
Identify and purchase the desired FAST option(s).
•
Obtain the invoice, the 20 ‐ digit FAST Access Code, and the FAST option activation
instructions.
4 Carefully enter the FAST Access Code into the FAST Code register text box.
5 Click [Submit] to finish.
6 Refer to the FAST Configuration table. The unit either accepts or rejects the code, and
the FAST Configuration table refreshes to reflect any upgrades in operation.