Comtech EF Data CDM-800, Installation And Operation Manual

Page: 47 / 130

CDM-800 Gateway Router Revision 1
Rear Panel Connections MN-CDM800
3–11
3.3.2 115V/230V Alternating Current (AC) Power Interface (Standard)
Figure 3-5. CDM-800 AC Power Interface
3.3.2.1 AC Operation – Applying Power
Figure 3-6. Applying AC Power to the CDM-800
To apply AC power to the CDM ‐ 800:
•
First, plug the provided AC power cord female end into the unit.
•
Then, plug the AC power cord male end into the user ‐ supplied power source.
•
Finally, switch the unit ON.
Feature Description
1 On / Off Switch
2 Press ‐ fit Fuse Holder
3 IEC Three ‐ prong Connector
AC Power Specifications
Input Power 40W maximum, 20W typical
Input Voltage
100V to 240V AC, +6%/ ‐ 10%, autosensing
(total absolute max. range is 90V to 254V AC)
Connector Type IEC
Fuse Protection
Line and neutral fusing
(2X) 20mm Slow ‐ blow type fuses:
T2.5A (2.5A) (115V or 230V AC operation without BUC)
T4.5A (4.5A) (115V or 230V AC operation with BUC)