Comtech EF Data CDM-800, Installation And Operation Manual

Page: 79 / 130

CDM-800 Gateway Router Revision 1
Ethernet-based Remote Product Management MN-CDM800
5–19
* Auto is the recommended configuration selection.
•
Negotiated Link Mode ( read ‐ only ) – The actual negotiated line speed and duplex setting for
the FE Interface is displayed here.
The viewable settings are:
o
10 BaseT / Full Duplex
o
100 BaseT / Full Duplex
o
10 BaseT / Half Duplex
o
100 BaseT / Half Duplex
Set the desired configurations on this page. Click [Submit] to save.
5.4.4.3.1.2 Configuration | Interface | GE-1 or GE-2
The ‘Configuration | Interface | GE ‐ 1’ and ‘GE ‐ 2’ pages permit the user to configure the rear
panel ‘GE1’ or ‘GE2’ 10/100/1000 BaseT Gigabit Ethernet ports.
Figure 5 ‐ 10. Configuration | Interface | GE ‐ 1 or GE ‐ 2 Page
GE-1 Interface or GE-2 Interface
The information and configuration options provided on these pages are identical to those
featured on the ‘Configuration | Interface | FE Mgt’ page. See Sect. 5.4.4.3.1.1 for information
about using these features.