Comtech EF Data CDM-800, Installation And Operation Manual

Page: 92 / 130

CDM-800 Gateway Router Revision 1
Ethernet-based Remote Product Management MN-CDM800
5–32
QoS Rules Per Group Table (Edit)
This read ‐ only section displays all existing QoS Rules Per Group Table entries.
For the ‘Max/Pri(ority)’ page:
For the ‘Min/Max’ page:
From left to right:
•
Index – The automatically ‐ assigned specific rule internal index number is identified here.
•
Protocol – The protocol for the specific rule is identified here.
•
Src IP/Mask – The Source IP Address/Mask is displayed here in the form
XXX.XXX.XXX.XXX/YY.
•
Dest IP/Mask – The Destination IP Address/Mask is displayed here in the form
XXX.XXX.XXX.XXX/YY.
•
Min Src Port / Max Src Port / Min Dst Port / Max Dst Port – The Source/Destination Ports
are displayed in these columns.
•
Min BW (Kbps) (‘Min/Max’ page only) / Max BW (Kbps) – The bandwidth values are
displayed in these columns.
•
Priority (‘Max/Pri(ority)’ page only) – The priority established for the specific rule is
identified here.
•
WRED – The WRED (Weighted Random Early Detection) setting for the specific rule is
identified here as Disable or Enable .
When WRED is enabled, the QoS Queue will attempt to smoothly drop packets as the queue
gets congested. This is recommended for queues that will carry TCP packets.
•
Filter All – The flow filter setting for the specific rule is identified here as Disable or Enable .