ComStream CM601, Installation And Operation Manual

Page: 175 / 228

Remote Command Summary Listing 01-0799-401D 08/02 15
PC Pure Carrier Config V Tx Pure Carrier 0, 1 0 Pure carrier transmission:
0=disable, 1=enable
PRD User Receive
Data Config NV UserRxData ? — Queries systems receive data rate
or invokes all Rx data rate
commands (bps)
PTD User Transmit
Data Config NV UserTxData ? — Queries systems transmit data rate
or invokes all Tx data rate
commands (bps)
RC Receive Coding
Rate Config NV Rx Code Rate 0 to 5, ? 3 Set receive FEC decoder type and
rate:
0=uncoded
1=Sequential 1/2
2=Sequential 3/4
3=Intelsat Viterbi 1/2
4=Intelsat Viterbi 3/4
5=Intelsat Viterbi 7/8
RD Receive Data
Rate Config NV RxDataRate 9600 to 4375000
(512000 max on
Low Speed
Modem card) 1544000 Receive demodulator data rate in
bps
RDI Receive Data
Invert Config NV Use :AA 0, 1 0 Invert receive data polarity:
0=disable, 1=enable
RE REset modem Config V Modem Reset — — Reset the modem to default settings
RM Rx Modulation
type Config NV Rx Mod Type 0, 1 1 0=BPSK, 1=QPSK
RO Rx Offset
frequency Config NV Rx Offset ? — Queries receive frequency offset in
Hz
RR Receive Symbol
Rate Config NV RxSymRate 4800 to 2500000 1544000 Receive symbol rate in sps
RS Receive
Synthesizer
Frequency Config NV RxIF 52000 to 88000,
104000 to
176000 70000 Receive synthesizer frequency in
kHz
SD Scrambling for
Demodulator Config NV Rx Scrambling 0, 1, 2 1 Set receive descrambling:
0=OFF, 1=COMSTRM, 2=IDR Man.
SM Scrambling for
Modulator Config NV Tx Scrambling 0, 1, 2 1 Set transmit descrambling:
0=OFF, 1=COMSTRM, 2=IDR Man.
TC Transmit Coding
Rate Config NV Tx Code Rate 0 to 5, ? 3 Set transmit FEC encoder type and
rate:
0=uncoded
1=Sequential 1/2
2=Sequential 3/4
3=Intelsat Viterbi 1/2
4=Intelsat Viterbi 3/4
5=Intelsat Viterbi 7/8
Table 3-3 Remote Command Summary Listing (continued)
Cmd
Mnemonic
Command
Name
Func /
Mem Type
Front Panel
Param
Range Default
Value
Description