ComStream CM601, Installation And Operation Manual

Page: 172 / 228

12 Remote Command Summary Listing 01-0799-401D 08/02
Use the following syntax:
<command mnemonic> <parameter>
where <command mnemonic> is the two- or three-letter command abbreviation
and <parameter> is the command argument.
Examples:
■
To set the doppler buffer mode to bypass, use the syntax:
DBM 1
■
To query the doppler buffer fill level, use the syntax:
DB ?
Remote
Command
Summary
Listing
Remote commands are summarized in alphabetical order in Table 3-3.
■
For each command the following information is provided in the table.
❒
Command mnemonic and command name
❒
Function and memory type (Func/Mem Type)
❒
Corresponding front panel command equivalent (if applicable)
❒
Parameter range (Param Range)
❒
Default value
❒
Brief description, including any modifications to CM701/CM601A
commands
❒
Dashes (—) indicate either non-applicable, the command is not available
or the command can be issued with no parameter
■
Detailed descriptions of each command are provided later in this chapter.