Compuprint PageMaster 402N User Manual Download Page 200

Page: 200 / 216

Apr 02

9-4

Compuprint PageMaster 402N User Guide

Installing the Stacker

Use the following procedure to install the stacker:

Remove any cardboard inserts or packing tape from the interior and exterior of the stacker.

Turn the printer off by pressing [ O ] on the power switch on the right side of the unit, and
disconnect the power cord from the AC outlet.

NOTE:

Installing the stacker while the printer is on may damage the printer or the stacker.

Insert coins or similar objects into the two spaces below the standard stacker cover, located at
the rear of the top of the printer. Push down or twist the coins to release the cover, and
remove the cover from the printer.

Summary of Contents for PageMaster 402N

























































































































































































































Search results

Summary of Contents for PageMaster 402N

Reviews:

Related manuals for PageMaster 402N

Brands by name

Popular brands

Compuprint PageMaster 402N, User Manual

Search results

Summary of Contents for PageMaster 402N

Reviews:

Related manuals for PageMaster 402N

Brands by name

Popular brands