manualshive.com logo in svg

Compaq Proliant 800, Manual, Page: 38 / 221

Share
Download
Compaq Proliant 800 Manual Download Page 38

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

2-9

Compaq ProLiant 800 Server Reference Guide

Writer:    Project:  Server Management Comments:

File Name: D-ch2.doc Last Saved On: 4/23/97 11:14 AM

Critical Error Log Messages   

continued

Error Message

Description

NMI- Automatic Server Recovery

Timer Expiration

The operating system has received notice of an

impending ASR-2 timer expiration.

Required System Fan Failure

The required system fan has failed. Accompanying

data in the log notes if an auto-shutdown sequence

has been invoked by the operating system.

UPS A/C Line Failure Shutdown or

Battery Low

The UPS notified the operating system that the AC

power line has failed. Accompanying data indicates if

an auto-shutdown sequence has been invoked or if

the battery has been nearly depleted.

Revision History Table

Some errors can be resolved by reviewing changes to the server’s
configuration. The server has an Automatic Revision Tracking (ART) feature
that helps you review recent changes to the server's configuration.

One ART feature is the Revision History Table, which contains the hardware
version number of the system board and any other system boards providing
ART-compatible revision information. This feature lets you determine the
level of functionality of an assembly in a system without opening or powering
down the unit.

Summary of Contents for Proliant 800






























































































































































































































Reviews:

No comments