Compaq Deskpro 2000 Series, Maintenance & Service Manual

Page: 54 / 285

2-12 Troubleshooting
✎
This utility may not detect non-Compaq devices.
■
If the list is correct, select OK .
The test option menu is displayed again.
■ If the list is incorrect, be sure that any new devices are installed properly.
4. Select one of the following from the test option menu:
■ Quick Check Diagnostics runs a quick, general test on each device with a minimal number of
prompts. If errors occur, they are displayed when the testing is complete.
■ Automatic Diagnostics runs unattended, maximum testing of each device with minimal prompts.
You can choose how many times to run the tests, to stop on errors, or to print or file a log of errors.
■
Prompted Diagnostics allows maximum control over the device testing process. You can choose
attended or unattended testing, decide to stop on errors, or choose to print or file a log of errors.
✎
Choosing attended testing allows data-destructive tests.
✎
When you run the TEST utility, be sure to record any error message numbers.
5. Follow the instructions on the screen as the diagnostic tests are run on the devices.
When the testing is complete, the test option menu is displayed again.
6. Exit to the Configuration and Diagnostics menu.
View System Information (INSPECT)
The View System Information (INSPECT) utility provides information about the system once it has
been configured. INSPECT operates with MS-DOS and provides information about the system
operating environment, including:
■
System
■
Operating system
■
ROM
■
System storage
■
System ports
■
System files
■
Memory
■
Keyboard
■
Graphics
■
Windows files
■
Miscellaneous