5-46
Removal and Replacement Procedures
If you need to manually eject a CD from the CD-ROM drive, insert a metal rod that is approximately
1.2 mm in diameter and at least 35 mm in length (1/16 x 1 3/8 inches) into the manual eject hole and
push firmly. A straightened paper clip works well. The tray will come out 1/4 to 1/2 inch. Pull the tray
out by hand until the CD can be removed.
Figure 5-40.
Manually Ejecting a Compact Disc From a Minitower Computer
To remove a drive from a 5.25-inch wide bay, complete the following steps:
1. Perform preparation procedures described in Section 5.1.3.
2. Remove the system unit cover (Section 5.1.6).
3. Remove the front bezel (Section 5.1.15.1).
Summary of Contents for Deskpro 2000 Series
