6-14
Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: G-CH6 REPAIR AND REPLACEMENT.DOC Last Saved On: 9/30/99 10:31 AM
Installing the Switch Components
To install the switch components into a new chassis:
1.
Install the motherboard. See “Installing the Motherboard,” earlier in this
chapter.
2.
Install the fan assembly. See “Installing the Fan Assembly,” earlier in
this chapter.
3.
Replace the switch cover. See “Replacing the Switch Cover,” earlier in
this chapter.
4.
Install the GBIC modules. See “Installing a GBIC Module,” earlier in
this chapter.
5.
Install the power supply or supplies. See “Installing the Power Supply,”
earlier in this chapter.
6.
Reconnect all external cabling.
7.
Turn on the power to the switch. The switch automatically runs POST.
8.
Check for error messages through Telnet.
