Installation
2-3
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: C-CH2 INSTALLATION.DOC Last Saved On: 9/30/99 10:20 AM
Selecting a Switch Mounting Method
The switch can be placed on a flat surface, such as a tabletop, or mounted in an
optional, standard 19-inch equipment rack.
Surface Mounting
To operate the switch on a surface, you do not need to perform additional
steps. Continue the installation procedure with “Installing GBIC Modules,”
later in this chapter.
Rack Mounting
You can install the switch in a RETMA 41U or 42U rack, in a Compaq rack,
or in a metric SW600 rack. Refer to the documentation that came in your
rack-mounting option kit for more information.
Installing GBIC Modules
The SAN Switch 8 can accommodate up to 8 GBIC modules. GBIC modules
are hot-pluggable. To install a GBIC module:
CAUTION:
The GBIC modules contain static-sensitive components. Use
electrostatic discharge (ESD) precautions while handling GBIC modules.
1.
Insert a GBIC module into a Fibre Channel port. The module is keyed
and can only be inserted one way.
CAUTION:
Do not force the GBIC module into a port if you feel resistance.
2.
Fully insert the GBIC module until it is properly seated in the
Fibre Channel port. If you are using IBM GBIC modules, lock the
modules into place with the locking bar. For other GBIC modules, the
latch prongs automatically lock to prevent accidental removal of the
GBIC module.
3.
Insert a protective plug over the GBIC module’s fiber-optic connectors.
4.
Repeat the procedure for each GBIC module to be installed.
