Setup
3-5
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: D-CH3 SETUP.DOC Last Saved On: 9/30/99 10:22 AM
Through a Telnet session you can manage the switch, perform diagnostics, and
view error messages. To initiate a Telnet session:
1.
Launch Telnet from a workstation connected to the network.
NOTE:
For Windows 95/98/NT, select Run from the Start menu. Type Telnet, then
click OK.
2.
From Telnet, use the IP address to connect to the switch.
NOTE:
For Windows 95/98/NT, select Remote System from the Connect menu on the
Telnet window. Enter the IP address of the switch in the Host Name box.
3.
Press Enter to display the login prompt. At the prompt, enter
admin
.
4.
At the password prompt, enter
password
.
5.
When the prompt
switchName:userName>
displays, enter a Telnet
command. You can change the password using the
passwd
command.
For more information on managing the switch remotely, refer to the Compaq
StorageWorks SAN Switch Fabric Operating System Management Guide or
the Compaq StorageWorks SAN Switch QuickLoop Management Guide that
came with your switch.
