Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: D-CH3 SETUP.DOC Last Saved On: 9/30/99 10:22 AM
Chapter
3
Setup
To set up the switch and prepare for switch management:
1.
Power on the switch.
2.
Make a serial connection to the switch.
3.
Initiate a Telnet session.
Powering Up the Switch
Turn on the AC power switch located on each power supply. The switch
automatically runs the Power-On Self-Test (POST) and the LED indicators
become active.
Front Panel LED Indicators
The color and flash speed of the front panel LED indicators signify the status
of each Fibre Channel port. Table 3-1 summarizes the possible LED states.
