Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: F-CH5 ERROR MESSAGES.DOC Last Saved On: 9/30/99 10:29 AM
Chapter
5
Error Messages
This chapter explains the error message formats and possible errors associated
with switch diagnostics. This section includes:
■
System error message formats
■
Diagnostic error message formats
■
Error message tables
System Error Message Formats
There is one error message format for the switch whether you are gathering
information from the local RS-232 serial port or using a remote Telnet session.
In all cases, the last error encountered is the first error displayed. Up to
64 messages are held in a buffer. If the 64-message limit is exceeded, the
messages are overwritten in a first in, first out sequence.
The
errShow
command displays all detected errors. The error counter goes to a
maximum of 999. The following information displays for each detected error:
■
Number of errors detected
■
Task ID and task name (task names are displayed using the
i
command)
■
Error type, date and time, error level, and description
■
Number of occurrences (shown in brackets following the date and time
stamp)
