manualshive.com logo in svg

Comnet CNGE28FX4TX24MSPOE+, Installation And Operation Manual

Share
Download
Comnet CNGE28FX4TX24MSPOE+ Installation And Operation Manual Download Page 89

inS_CnGE28FX4TX_rEv–

08/31/12     PAGE 89

INSTALLATION AND OPERATION MANUAL 

CNGE28FX4TX

Tech SupporT: 1.888.678.9427

PoE Configuration - Power management Mode

There are 2 modes for configuring when to the ports is shut down.

Label

Description

Actual 
Consumption

In this mode the ports are shut down when the actual power 
consumption for all ports exceeds the amount of power that the 
power supply can deliver or if the actual power consumption for a 
given port exceeds the reserved power for that port. The ports are 
shut down according to the ports priority. If two ports have the same 
priority the port with the highest port number is shut down.

Reserved Power In this mode the ports are shut down when total reserved powered 

exceeds the amount of power that the power supply can deliver. In 
this mode the port power is not turned on if the PD requests more 
power the available.

Summary of Contents for CNGE28FX4TX24MSPOE+

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands