manualshive.com logo in svg

Comnet CNGE28FX4TX24MSPOE+, Installation And Operation Manual

Share
Download
Comnet CNGE28FX4TX24MSPOE+ Installation And Operation Manual Download Page 45

inS_CnGE28FX4TX_rEv–

08/31/12     PAGE 45

INSTALLATION AND OPERATION MANUAL 

CNGE28FX4TX

Tech SupporT: 1.888.678.9427

STP Bridges

This page provides a status overview for all STP bridge instances.

The displayed table contains a row for each STP bridge instance, where the column displays the 
following information:

Label

Description

MSTI

The Bridge Instance. This is also a link to the STP Detailed Bridge 
Status.

Bridge ID

The Bridge ID of this Bridge instance.

Root ID

The Bridge ID of the currently elected root bridge.

Root Port

The switch port currently assigned the root port role.

Root Cost

Root Path Cost. For the Root Bridge this is zero. For all other Bridges, 
it is the sum of the Port Path Costs on the least cost path to the Root 
Bridge.

Topology Flag

The current state of the Topology Change Flag for this Bridge 
instance.

Topology  
Change Last

The time since last Topology Change occurred.

Refresh

Select to refresh the page immediately.

Auto-refresh

Check this box to enable an automatic refresh of the page at regular 
intervals.

Summary of Contents for CNGE28FX4TX24MSPOE+

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands