inS_CnGE28FX4TX_rEv–
08/31/12 PAGE 24
INSTALLATION AND OPERATION MANUAL
CNGE28FX4TX
Tech SupporT: 1.888.678.9427
LLDP Neighbor Information
This page provides a status overview for all LLDP neighbors. The displayed table contains a row
for each port on which an LLDP neighbor is detected. The columns hold the following information:
Label
Description
Local Port
The port on which the LLDP frame was received.
Chassis ID
The Chassis ID is the identification of the neighbor’s LLDP frames.
Remote Port ID
The Remote Port ID is the identification of the neighbor port.
System Name
System Name is the name advertised by the neighbor unit.
Port Description Port Description is the port description advertised by the neighbor
unit.
System
Capabilites
System Capabilities describes the neighbor unit’s capabilities. The
possible capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the
capability is disabled, the capability is followed by (-).
Management
Address
Management Address is the neighbor unit’s address that is used
for higher layer entities to assist the discovery by the network
management. This could for instance hold the neighbor’s IP address.
Refresh
Select to refresh the page immediately.
Auto-refresh
Check this box to enable an automatic refresh of the page at regular
intervals.
