inS_CnGE28FX4TX_rEv–
08/31/12 PAGE 61
INSTALLATION AND OPERATION MANUAL
CNGE28FX4TX
Tech SupporT: 1.888.678.9427
Trap Probe
Security Engine
ID
Indicates the SNMP trap probe security engine ID mode of operation.
Possible values are:
Enabled: Enable SNMP trap probe security engine ID mode of
operation.
Disabled: Disable SNMP trap probe security engine ID mode of
operation.
Trap Security
Engine ID
Indicates the SNMP trap security engine ID. SNMPv3 sends traps
and informs using USM for authentication and privacy. A unique
engine ID for these traps and informs is needed. When “Trap
Probe Security Engine ID” is enabled, the ID will be probed
automatically. Otherwise, the ID specified in this field is used.
The string must contain an even number between 10 and 64
hexadecimal digits, but all-zeros and all-’F’s are not allowed.
Trap Security
Name
Indicates the SNMP trap security name. SNMPv3 traps and
informs using USM for authentication and privacy. A unique
security name is needed when traps and informs are enabled.
SNMP-Communities
Configure SNMPv3 community’s table on this page. The entry index key is Community.
Label
Description
Delete
Check to delete the entry. It will be deleted during the next save.
Community
Indicates the community access string to permit access to SNMPv3
agent. The allowed string length is 1 to 32, and the allowed content is
the ASCII characters from 33 to 126.
Source IP
Indicates the SNMP access source address.
Source Mask
Indicates the SNMP access source address mask.
