inS_CnGE28FX4TX_rEv–
08/31/12 PAGE 74
INSTALLATION AND OPERATION MANUAL
CNGE28FX4TX
Tech SupporT: 1.888.678.9427
Security
ACL
Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames
received on a port unless the frame matches a specific ACE.
Label
Description
Port
The logical port for the settings contained in the same row.
Policy ID
Select the policy to apply to this port. The allowed values are 1
through 8. The default value is 1.
Action
Select whether forwarding is permitted (“Permit”) or denied (“Deny”).
The default value is “Permit”.
Rate Limiter ID
Select which rate limiter to apply to this port. The allowed values are
Disabled or the values 1 through 15. The default value is “Disabled”.
Port Copy
Select which port frames are copied to. The allowed values are
Disabled or a specific port number. The default value is “Disabled”.
Logging
Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is “Disabled”. Please note that the System Log
memory size and logging rate is limited.
Shutdown
Specify the port shut down operation of this port. The allowed values
are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is “Disabled”.
Counter
Counts the number of frames that match this ACE.
