manualshive.com logo in svg

Comnet CNGE28FX4TX24MSPOE+, Installation And Operation Manual

Share
Download
Comnet CNGE28FX4TX24MSPOE+ Installation And Operation Manual Download Page 80

inS_CnGE28FX4TX_rEv–

08/31/12     PAGE 80

INSTALLATION AND OPERATION MANUAL 

CNGE28FX4TX

Tech SupporT: 1.888.678.9427

Label

Description

Port

The logical port for the settings contained in the same row.

Mode

Select mirror mode.  
Rx only: Frames received at this port are mirrored to the mirror port. 
Frames transmitted are not mirrored. 
TX only: Frames transmitted from this port are mirrored to the mirror 
port. Frames received are not mirrored.  
Disabled: Neither frames transmitted nor frames received are 
mirrored.  
Enabled: Frames received and frames transmitted are mirrored to the 
mirror port.  
 
Note: For a given port, a frame is only transmitted once. It is therefore 
not possible to mirror TX frames for the mirror port. Because of this, 
mode for the selected mirror port is limited to Disabled or Rx only.

Summary of Contents for CNGE28FX4TX24MSPOE+

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands