manualshive.com logo in svg

Comnet CNGE28FX4TX24MSPOE+, Installation And Operation Manual

Share
Download
Comnet CNGE28FX4TX24MSPOE+ Installation And Operation Manual Download Page 21

inS_CnGE28FX4TX_rEv–

08/31/12     PAGE 21

INSTALLATION AND OPERATION MANUAL 

CNGE28FX4TX

Tech SupporT: 1.888.678.9427

HTTPS

Label

Description

Mode

Indicates the HTTPS mode operation. Possible modes are: 
Enabled: Enable HTTPS mode operation.
Disabled: Disable HTTPS mode operation.

Automatic 
Redirect

Indicates the HTTPS redirect mode operation. Automatic redirect web 
browser to HTTPS during HTTPS mode enabled. Possible modes are: 
Enabled: Enable HTTPS redirect mode operation.
Disabled: Disable HTTPS redirect mode operation.

Save

Select to save changes.

Reset

Select to undo any changes made locally and revert to previously 
saved values.

SSH

Label

Description

Mode

Indicates the SSH mode operation. Possible modes are: 
Enabled: Enable SSH mode operation.
Disabled: Disable SSH mode operation.

Save

Select to save changes.

Reset

Select to undo any changes made locally and revert to previously saved 
values.

Summary of Contents for CNGE28FX4TX24MSPOE+

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands