inS_CnGE28FX4TX_rEv–
08/31/12 PAGE 77
INSTALLATION AND OPERATION MANUAL
CNGE28FX4TX
Tech SupporT: 1.888.678.9427
RADIUS Authentication Server Configuration
The table has one row for each RADIUS Authentication Server and a number of columns, which
are:
Label
Description
#
The RADIUS Authentication Server number for which the
configuration below applies.
Enable
Enable the RADIUS Authentication Server by checking this box.
IP Address
Enable fallback to local authentication by checking this box.
If none of the configured authentication servers are alive, the local
user database is used for authentication.
This is only possible if the Authentication Method is set to something
else than ‘none or ‘local’.
Port
The UDP port to use on the RADIUS Authentication Server. If the
port is set to 0 (zero), the default port (1812) is used on the RADIUS
Authentication Server.
Secret
The secret - up to 29 characters long - shared between the RADIUS
Accounting Server and the switch-stack.
Monitor and Diag
MAC Table
The MAC Address Table is configured on this page. Set timeouts for entries in the dynamic MAC
Table and configure the static MAC table here.
Aging Configuration
By default, dynamic entries are removed from the MAC table after 300 seconds. This removal is
also called aging.
