inS_CnGE28FX4TX_rEv–
08/31/12 PAGE 79
INSTALLATION AND OPERATION MANUAL
CNGE28FX4TX
Tech SupporT: 1.888.678.9427
Static MAC Table Configuration
The static entries in the MAC table are shown in this table. The static MAC table can contain 64
entries.
The maximum of 64 entries is for the whole stack, and not per switch.
The MAC table is sorted first by VLAN ID and then by MAC address.
Label
Description
Delete
Check to delete the entry. It will be deleted during the next save.
VLAN ID
The VLAN ID for the entry.
MAC Address
The MAC address for the entry.
Port Members
Checkmarks indicate which ports are members of the entry. Check or
uncheck as needed to modify the entry.
Adding a New
Static Entry
Select
Add new static entry
to add a new entry to the static MAC
table. Specify the VLAN ID, MAC address, and port members for the
new entry. Select
Save
.
Mirror
Configure port Mirror on this page.
To debug network problems, selected traffic can be copied, or mirrored, to a mirror port where a
frame analyzer can be attached to analyze the frame flow.
The traffic to be copied to the mirror port is selected as follows:
All frames received on a given port (also known as ingress or source Mirror).
All frames transmitted on a given port (also known as egress or destination Mirror).
Port to mirror also known as the mirror port. Frames from ports that have either source (RX) or
destination (TX) Mirror enabled are mirrored to this port. Disabled disables Mirror.
