inS_CnGE28FX4TX_rEv–
08/31/12 PAGE 3
INSTALLATION AND OPERATION MANUAL
CNGE28FX4TX
Tech SupporT: 1.888.678.9427
Regulatory Compliance Statement
Product(s) associated with this publication complies/comply with all applicable regulations. Please
refer to the Technical Specifications section for more details.
Warranty
ComNet warrants that all ComNet products are free from defects in material and workmanship
for a specified warranty period from the invoice date for the life of the installation. ComNet will
repair or replace products found by ComNet to be defective within this warranty period, with
shipment expenses apportioned by ComNet and the distributor. This warranty does not cover
product modifications or repairs done by persons other than ComNet-approved personnel, and
this warranty does not apply to ComNet products that are misused, abused, improperly installed,
or damaged by accidents.
Please refer to the Technical Specifications section for the actual warranty period(s) of the
product(s) associated with this publication.
Disclaimer
Information in this publication is intended to be accurate. ComNet shall not be responsible for its
use or infringements on third-parties as a result of its use. There may occasionally be unintentional
errors on this publication. ComNet reserves the right to revise the contents of this publication
without notice.
Note. The PoE port may be considered SELV circuits, if:
»
Not likely to require connection to an Ethernet network with outside plant routing including
campus environment; and
»
The installation instructions clearly state that the ITE is to be connected only to PoE Networks
without routing to the outside plant.
Safety Indications
»
The equipment can only be accessed by a service person or users who have been instructed.
»
The equipment should be installed in the location that needs a tool or lock and key, or other
means of security, and controlled by a person of authority.
