manualshive.com logo in svg

CommScope ION-E Series, Installation Manual

The CommScope ION-E Series Installation Manual is a comprehensive guide designed to assist users in properly installing and configuring their ION-E Series equipment. This user-friendly manual can be easily downloaded for free from our website, allowing you to conveniently access all the information you need for a seamless installation process.

Share
Download
background image

M0201AA 

ION

®

-E Series Hardware Installation Guide

© June 2017 CommScope, Inc.

Page 13

Chapter Topics

Page

WCS-2 and WCS-4 Subracks and Modules .......................................................................................................................................................... 14

WCS Subrack Front Panel Card Slots and GUI Identification .......................................................................................................................... 15
WCS Subrack Back Panel Connectors ............................................................................................................................................................. 16
WCS Subrack Alarm Connector....................................................................................................................................................................... 17
WCS Fan Modules and Filters ......................................................................................................................................................................... 18
System User Interface Card (SUI) ................................................................................................................................................................... 19
RF Donor Card (RFD)....................................................................................................................................................................................... 20
Optical Transport Card (OPT).......................................................................................................................................................................... 21
Copper Transport Card (CAT).......................................................................................................................................................................... 22
Auxiliary Unit Transport Card (AUT) ............................................................................................................................................................... 23

Installing Subracks and PSUs in an Equipment Rack ........................................................................................................................................... 24

Rack-Mounting the Subracks and PSU............................................................................................................................................................ 24
Connect the Subrack and PSU Power and Communication Cables ................................................................................................................ 25
Install the CAN and TEN Cards........................................................................................................................................................................ 27
Install SFP+ Transceivers in the OPT Cards ..................................................................................................................................................... 28
Connect the RFD Cards ................................................................................................................................................................................... 29
Connect the CAT Cards ................................................................................................................................................................................... 30
Connect the AUT Cards................................................................................................................................................................................... 32

This chapter provides a product overview and installation instructions for the ION-E Series WCS-2 and WCS-4 
Subracks.

WCS-2 

AND

 WCS-4 S

UBRACKS

 

AND

 M

ODULES

3

Summary of Contents for ION-E Series

































































Reviews:

No comments

Related manuals for ION-E Series

Cisco ONS 15327 User Documentation preview
ONS 15327
Brand: Cisco Pages: 559

Brands by name

Popular brands

Load more brands