ION
®
-E Series Hardware Installation Guide
M0201AA
Page 22
© June 2017 CommScope, Inc.
WCS-2 and WCS-4 Subracks and Modules
Copper Transport Card (CAT)
The CAT Card provides power and 10 Gbps data over Cat6A cables to UAPs. You install a CAT Card in Slots
L1 - L4 of the WCS-2 or WCS-4 Subrack.
CAT Card LEDs
Ref # LED
LED Color
Description
1
RJ45 1 - 4
• Off
• No link between the CAT Card and the UAP
1
to which the port is connected.
• Green
• Indicates that a 10G link is established.
• Yellow
• Indicates that a 1G link is established.
2
3
POE
• Off
• Power over Cat6A between the CAT Card and the UAP has not been
established.
• Green
• Power over Cat6A established between the CAT Card and the UAP.
4
Port
• Off
• No power to the subrack.
• Red
• Active fault on that link.
1
Unless otherwise noted, the use of “UAP” collectively refers to the UAP, UAP-X, UAP-N25, and the CAP L.
2
1G link is not currently supported.
CAT Card Connectors
Ref #
Component
Device
Function
2
Port 1 - 4
RJ45, Cat6A
Connects the CAN/TEN to UAPs over Cat6A cables.
1
• Each CAT Card can support a maximum of six UAPs.
• A CAN/TEN with four CAT cards installed can support up to
twenty-four UAPs.
1
Unless otherwise noted, the use of “UAP” collectively refers to the UAP, UAP-X, UAP-N25, and the CAP L.
2
1
3
4
