M0201AA
ION
®
-E Series Hardware Installation Guide
© June 2017 CommScope, Inc.
Page 23
WCS-2 and WCS-4 Subracks and Modules
Auxiliary Unit Transport Card (AUT)
The AUT Card provides a 1 Gb pass-through connection between the CAN/TEN and the UAP for WiFi, IP
cameras, or other 1 Gb Ethernet devices. You install an AUT Card in Slot M1 or M2 of the WCS-2 or WCS-4
Subrack.
UNRESOLVED:
The RJ45 ports are reversed top (5 - 6) vs. bottom (1 - 4). Are the LEDs the same regardless
of vertical orientation of plug, or are the LEDs also reversed (top left is bottom right)?
UNRESOLVED:
If the Right LED is green, to know if it means 100 Mbit/s vs. not connected, to be not
connected, wouldn’t the Left LED be off?
UNRESOLVED:
Confirm Gbps can replace Gbit/s and Mbps = Mbit/s
For information on the internal mapping between CAT Cards and AUT Cards, go to
"Connect the AUT
Cards” on page 32
.
AUT Card LEDs
Ref #
LED
LED Color
Description
2
Left LED
on RJ45 Ports 1 - 8
• Off
• No activity on that port.
• Flashing green
• Activity on that port.
Right LED
on RJ45 Ports 1 - 8
• Off
• Port is transmitting 1 Gbps.
• Green
• Port is transmitting 100 Mbps or is not connected (
Left LED will be off
).
3
STATUS
• Off
• Error on the AUT Card, or AUT Card is not receiving power.
• Green
• AUT Card functioning as expected.
• Red
• AUT Card is experiencing an error.
AUT Card Connectors
Ref #
Component
Device
Function
1
Ports 1 - 8
RJ45 ports
Connects the CAN/TEN to WiFi, IP Camera, or other 1Gb
Ethernet devices; provides the 1Gb pass-through connection
between the CAN/TEN and the UAP.
1
1
Unless otherwise noted, the use of “UAP” collectively refers to the UAP, UAP-X, UAP-N25, and the CAP L.
1
2
3
2
