ION
®
-E Series Hardware Installation Guide
M0201AA
Page 40
© June 2017 CommScope, Inc.
Removing an e-POI Module from an e-POI Subrack
R
EMOVING
AN
E
-POI M
ODULE
FROM
AN
E
-POI S
UBRACK
The ION-E Software automatically detects when an e-POI Module is added to an e-POI Subrack. If you need to
remove an e-POI Module, you must do the following:
1
Disconnect the Ribbon cable from the e-POI Module that you are removing from the e-POI Subrack.
2
Loosen the two thumbscrews on the bottom of the e-POI Module and pull it from the subrack.
3
Press the Config button on the IFC for 5 seconds. This tells the ION-E Software to scan and delete the
removed e-POI Module from inventory and clear any alarms related to that e-POI Module.
4
Wait for the e-POI Module Status LEDS on the IFC to flash off and then on, which indicates that the IFC has
been reconfigured.
e-Poi Module
1
2
3
4
IFC
