Commend C-G3-TEL, Product Manual

Page: 23 / 30

G8-TEL / G3-TEL PABX mode
2.0/0817 23
Define a range of numbers via wildcards
To simplify the configuration in CCT 800, it is possible to define a range of phone numbers as “wild-
cards” (
see “Configure PABX mode” on page 24 ). Per wildcard, max. 41 entries are possible. The tele-
phone numbers included by those wildcards can be dialled at the Intercom stations as explained at
“Phone call by dialling the telephone interface manually” on page 22 .
Examples
Cancel conversation

A conversation can be cancelled at the telephone with “#” or at the Intercom station with
X
.
Call request in PABX mode
For call requests and input messages, it is possible to combine auto-dialler mode with PABX mode.
This means:

At initiation of a call request or input message, a switch-over to “Auto-dialler mode” is initiated
automatically. As a result, the respective features of this mode will become effective ( see page 10 ).

In spite of that feature, a phone call can still be set up as described at “Outgoing phone call from the
Intercom system” on page 22 .
Incoming call from the telephone to the Intercom system
Initiate call
A call in PABX is initiated in the same way as in auto-dialler mode ( see page 13 ).
Cancel conversation
A conversation in PABX mode is cancelled in the same way as in auto-dialler mode ( see page 13 ).
PA code via CCT 800 Call number range
4*** 4000 to 4999
63** 6300 to 6399
345* 3450 to 3459
5* 50 to 59
ATTENTION: Collisions
Avoid collisions with Intercom call numbers and function codes. That is, in case of a defined range of
“2***”, e.g. the three-digit Intercom call number “210” cannot be dialled.
NOTES: Cancel conversation
 To cancel a phone call initiated by dialling the interface manually at the telephone with “#”, the
function
“After-dialling at the telephone (outgoing phone call)” has to be activated.
 When an outgoing conversation is cancelled, the (call) connection to the Intercom system will also
be disconnected (contrary to incoming calls,
see page 13 ).
 If the telephone is hung up without pressing “#”, the conversation is automatically cancelled after
approx. 6 seconds.
NOTE: Configuration
In case of a initiated incoming call from a telephone to the Intercom system, the location message and, if
configured, individual messages are switched on at the telephone (same as in auto-dialler mode).