Auto-dialler mode
G8-TEL / G3-TEL
12
2.0/0817
Examples for the call procedure
In the following two examples, the difference of the call procedures via dialling interface and a call
request and/or input message is shown. The optional points require an appropriate configuration in
CCT 800.
Call via dialling interface
Call request/input message
Outgoing call
Intercom station
Telephone
(within the public telephone net)
– Initiate a call
– Calm down message
– Telephone is ringing
– Going off-hook
– Location message
– Enter password
– Individual message (optional)
Call
Conversation
End
– Cancel call
– Cancel call
Outgoing call
Intercom station
Telephone
(within the public telephone net)
– Initiate a call
– Calm down message (optional)
– Telephone is ringing
– Going off-hook
– Location message
– Call request message
– Enter password
– Individual message (optional)
– Dial tone (optional)
– Take over call with “#”
– Individual message (optional)
Call
Conversation
End
– Cancel call
– Cancel call
