Auto-dialler mode
G8-TEL / G3-TEL
16
2.0/0817
Group call types
The 15 call types of the Intercom Server can be grouped in 4 different call types. These 4 call types are
also used for individual messages. Each of the drop-down lists represents one of the 15 call types of
the Intercom Server. In the example below (screenshot), the call types “2” and “8” (of the Intercom
Server) are grouped to “Call 2 (Emergency call)”, the call types “6”, “7”, “11”, “14” and “15” (of the Inter-
com Server) are grouped to “Active 2”. This also means: if individual messages are configured for the
call types “Call 2 (Emergency call)” and “Active 2”, individual messages will be put out for the call types
“2”, “8” and/or “6”, “7”, “11”, “14” or “15” (
see also “Individual messages” on page 19
Call types in CCT 800
The following options are available in the drop-down lists
Group call types
:
Call 1 (Normal call)
: The call type will be transferred via the telephone interface as “Call 1 (Normal
call)”.
Call 2 (Emergency call)
: The call type will be transferred via the telephone interface as “Call 2
(Emergency call)”.
Active 1
: The call type will be transferred via the telephone interface as “Active 1”.
Active 2
: The call type will be transferred via the telephone interface as “Active 2”.
Standard
: The call type will be grouped to none of the above listed call types.
Initiate call
Call via dialling interface
At the Intercom station, the call number of the telephone interface can be dialled manually or by direct
dialling (configuration at
Subscriber > Direct Dialling
).
Call request and input message
Configure the respective telephone interface as control desk.
For the calling station, configure a call request to the respective control desk.
For a calling input, configure an input message to the respective control desk.
NOTES: Call types
Call types can only be grouped if the telephone interface is configured as central desk. For further
information, see manual “
Intercom Server Configuration
”.
For further information on call types, see manual “
Intercom Server Configuration
”.
NOTE: Further information
For further information on configuring of the features described below, see manual “
PRO 800 Basic
”.
ATTENTION: Input messages
If the indication of input messages via buzzer is deactivated, no call is initiated to the telephone
(
Inputs > Input message >
tab
Call types
).
If a calm-down message shall be put out at the calling station after initiation of a call request, an
appropriate configuration in CCT 800 is required (
see also “Calm-down message for call requests”
)
.
