Comelit IPNVR916A, Manual

Page: 84 / 135

User’s Manual
76
10.1 Registering Devices
1. Click
All Devices in the Site panel, and then the button at the bottom of the Site List panel. The Device
Scan window appears.
Protocol
: Select the protocol or manufacturer of the device to scan. Event related functions are not
supported for devices that do not use the iNEX protocol, and some other functions may not be supported
depending on the settings of the device.
Scan Mode : Select the scan mode. Clicking the Start Scan button displays the results in the list. If the
IP address range of the device is different from that of the NVR system, the iNEX program considers
the IP address invalid. In this case, you must change the device’s IP address to register the device.
−
Auto Scan (LAN) : Lists devices in a LAN environment (supported only for the network video devices).
If the device uses the ONVIF Conformance protocol, this function is supported only when you have
checked the
Disable WS-Discovery Windows Service (fdPHost, FDResPub)
box during the
software installation in Microsoft
®
Windows
®
Vista or later operating systems.
−
IP Address : Allows you to enter the IP address of a device. You can search more than one device
at a time by entering a range of IP addresses.
−
DVRNS
: Allows you to enter the device name registered on a DVRNS server if the device uses the
DVR Name Service (DVRNS) function.
−
Domain Name : Allows you to enter the device's domain name registered on a DNS server if the
device uses the domain name service.
: Select the devices to register by checking the box beside each device name in the list. Selecting
the Select All box selects all devices in the list.