Comelit IPNVR916A, Manual

Page: 75 / 135

Network Video Recorder
67
Chapter 7 — Event Handling
You can monitor video from a camera where an event is detected and play back event-recorded video
(supported only for devices which use the iNEX protocol).
First, check the following.
Devices should be added to a device group. Refer to Chapter 10 — Device Management (p. 75) for
details.
There should be recorded data in the allocated storage. Refer to
Chapter 12 — Storage Management
(p. 91) for details.
The event detection functions of the device should be enabled.
7.1 Handling a Monitoring Event
You can monitor live video from a camera where an event is detected or play back event-recorded video
if video of the selected event has been recorded.
The event list displays live and callback events from the registered devices. The
callback events are listed only when the remote callback function is set up in the
device.
You can change the options of the event list display during
Menu – Preference
Settings . Refer to Chapter 3 — System Overview, 3.3 Client, Menu –
Preference Settings (p. 26) for details.
The description of event icons which are displayed in the event list is as follows
(some event icons may not be supported, depending on the specifications and version
of the device):
Motion Detection Video Blind Video Loss
Object Detection Trip-Zone Tampering
Text-In Audio Detection
Video Analytics Detection
/ Alarm-In On/Off / Alarm-In Bad/Good System Boot Up
System Alive System Restart System Shut Down
Recorder Bad Disk S.M.A.R.T. Disk Bad
Disk Full Disk Almost Full Disk Config Change
Disk Temperature / External Storage In/Out / Panic Recording On/Off
/ Fan Error On/Off
Monitoring Video
Monitoring video from a camera where an event is detected is supported in the Live panel (maximum 4).
If a Live tab is not on the tab panel, go to the
System menu, click New Tab and Live .