Comelit IPNVR916A, Manual

Page: 64 / 135

User’s Manual
56
Setting up Instant Recording
Instant recording can be manually started or stopped while monitoring video (supported only for devices
registered on one of recording services).
1. Click the
Schedule Setup
button at the bottom. The
Schedule Setup
window appears.
2. Click the
Instant Recording button at the bottom, and the Instant Recording Setup window appears.
The settings are only for recording video from network video transmitters. When recording video from
other devices, the NVR system performs recording based on the settings in each device. Select the desired
compression codec, resolution, frame rate and quality of video. The frame rate cannot exceed 15 ips
when video is recorded with the H.264 codec and 4CIF resolution.
3. Run the iNEX Client program. Select a camera screen (on the Live screen) on
which video to record is displayed and click the (Instant Recording) button
on the control toolbar. The Instant Recording OSD ( ) is displayed at the top
right corner of the camera screen, and the system starts recording based on the
predefined settings. Clicking the
(Instant Recording) button again stops
recording. Recording might be delayed because of system congestion, and the
recording OSD might be displayed later or for longer than the scheduled time.