Comelit IPNVR916A, Manual

Page: 11 / 135

Network Video Recorder
3
1.4 Front Panel
①
Power Button: Turns on or off the system.
②
Power LED: Is lit when the unit is turned on.
③
HDD LED:
Flickers when the unit accesses to the hard disk drive.
④
DVD RW:
Used to save the recorded data on the CD-RW or DVD RW media.
⑤
USB Port: Connects the USB devices.
NOTE: Windows may not operate properly when using the USB connectors on the front panel of the unit,
depending on the model type of the USB device. In this case, connect the USB device after Windows boots
properly or use the USB connectors located on the rear panel.
1.5 Upgrade
You can upgrade the NVR system by using a USB flash drive as follows:
1. Connect a USB flash drive containing the upgrade package file to the NVR while the iNEX Client program
is running.
2. Click
iNEX Update
under the
System
Menu in the iNEX Client program. The following window appears.
Click the button and select a
Standard.conf
file. The folder path and software version of the selected
file is displayed.
→
Click the Upgrade button.
→
The iNEX Client program closes and the NVR system
enters Windows mode.
→
The NVR system starts upgrading. When upgrade is complete, the iNEX
program runs automatically.