Comelit IPNVR916A, Manual

Page: 121 / 135

Network Video Recorder
113
NOTE:.NET Framework and the Visual C++ Runtime Libraries are installed automatically, and it may take
some time. This installation step will be skipped if the programs are already installed on your computer.
7. When the following screen appears, click the
Close button
to complete the installation.
NOTE: After successfully installing the service, the service,
Service Manager program (the
icon is displayed in the
notification area of the task bar) and Setup program run
automatically.
8. Select the language in which to run the program and then click
OK
.
NOTES:
To properly display the selected language, your PC’s operating system should
be set to support the selected language.
To change the iNEX program’s language after the software has been installed,
select Language Selector in the iNEX
→
Utility folder of the Start menu before
running the iNEX program.
NOTE: The following programs are provided apart from the iNEX program running (Go to the Start Menu
→
Click iNEX and then Utility).
– ProblemReport, SecretKey: You will use it following the directions of your dealer or distributor when your
dealer or distributor request.
– LanguageSelector: Use it to change the iNEX program’s language.
16.2 Uninstall
1. Stop running the service and Client program first.
NOTE: The iNEX software might not uninstall correctly if you uninstall it while the service or Client program is
running.
CAUTION: The iNEX software should be uninstalled following the procedures below. If you
delete the installation folder manually, the iNEX software cannot be uninstalled or reinstalled.
2. Go to the
Start
Menu and click
iNEX
. Click
Uninstall iNEX
.