Comelit IPNVR916A, Manual

Page: 10 / 135

User’s Manual
2
1.2 System Diagram
Video Input, Network Video Transmitters, Network Cameras, Remote Monitoring, iNEX Client
1.3 Rear Panel
①
Power In:
Connect a power cord.
②
USB Port: Connect USB devices.
③
Network (RJ-45):
Connect a Cat5 cable with an RJ-45 jack. Refer to
Chapter 2 — Getting Started,
2.2 System Setting (p. 6) for details about network setting.
④
Audio In (mic): Connect a microphone. This is for two-way audio communication.
⑤
Audio Out (Line out):
Connect a speaker.
⑥
Audio In (Line in):
Connect a line-in device. This is for two-way audio communication.
⑦
DVI:
Connect a PC monitor. Refer to
Chapter 3 — System Overview, 3.3 Client, Menu – Preference
Settings, Screen Format (p. 27) for details about the monitor setting.
⑧
D-Sub:
Connect a PC monitor. Connect a monitor before turning on the system. Video might not be
displayed on the monitor when connecting a monitor after turning on the system. Refer to Chapter 3
— System Overview, 3.3 Client, Menu – Preference Settings, Screen Format (p. 27) for details
about the monitor setting.
NOTE: The location of DVI and D-Sub connectors is subject to change without notice.