Comelit IPNVR916A, Manual

Page: 117 / 135

Network Video Recorder
109
NOTE: The following screen appears when using the Microsoft
®
Windows
®
Vista or later operating system. It is recommended
that you check the Disable WS-Discovery Windows Service
(fdPHost, FDResPub) box. If you do not check the box, the iNEX
program cannot auto-scan the devices that use the ONVIF
protocol when scanning the devices for device registration.
NOTE:.NET Framework and the Visual C++ Runtime Libraries are installed automatically, and it may take
some time. This installation step will be skipped if the programs are already installed on your computer.
7. When the following screen appears, click the
Close
button
to complete the installation.
8. Select the language in which to run the program and then click
OK
.
NOTES:
To properly display the selected language, your PC’s operating system
should be set to support the selected language.
To change the iNEX program’s language after the software has been installed,
select Language Selector in the iNEX
→
Utility folder of the Start menu before
running the iNEX program.
NOTE: The following Utility programs are provided (Go to the Start Menu
→
Click iNEX and then Utility).
– ProblemReport: You will use it following the directions of your dealer or distributor when your dealer or
distributor request.
– LanguageSelector: Use it to change the iNEX program’s language.
15.2 Uninstall
1. Stop running the iNEX program first.
NOTE: The iNEX software might not uninstall correctly if you uninstall it while the program is running.
CAUTION: The iNEX software should be uninstalled following the procedures below. If you
delete the installation folder manually, the iNEX software cannot be uninstalled or reinstalled.