Comelit IPNVR916A, Manual

Page: 111 / 135

Network Video Recorder
103
Chapter 14 — Map Editor
You can register a map to monitor video from cameras, event detection and input/output device’s status of
devices registered on the administration service on a map on the Client system (supported only for devices
which use the iNEX protocol).
14.1 Registering Map
1. Run the
iNEX Setup
program → Select the
Device
menu.
2. Click
Map in the Site panel, and then the button at the bottom of the Site List panel on the right. The
Map Editor window appears.
3. Select an input/output device connected to a device or a sub-map in the
Site
panel and drag and drop it
on the canvas.
4. Set up the map. Refer to
14.2 Setting up Map
(p. 104) for details.
5. Entering a map name and clicking the
OK button completes registration of the map.