16
Automatic Fill using a WATER FILTRATION SYSTEM
When connecting your STAT
IM
B to an external filling device such as a water filtration system, make sure
your unit is set to the AUTOMATIC filling mode. (See section above on setting the water reservoir filling
mode.)
1.
Connect the water filtration system’s Teflon
tube (or other suitable tube) to the automatic fill
port at the back of the unit.
2.
Ensure the tube runs freely from the water
filtration system. It should not be sharply bent,
crushed or obstructed in any way.
3.
Open the valve on the water filtration system to
fill the accumulation tank.
4.
Open the accumulation tank’s valve to facilitate
the flow of water to the STAT
IM
B.
5.
Go to the home screen and select any cycle to
activate the filling system.
IMPORTANT!
When selecting an automatic filling option, it is best to use a direct-to-drain
waste connection. Use of an external waste bottle will require careful monitoring and frequent
emptying.
WATER
FILTRATION
SYSTEM
