43
9. Storing, Retrieving and Printing Sterilization Records
The STATCLAVE’s internal memory is capable of storing data on every cycle, whether successful or
incomplete, for the lifetime of the unit. You can access this information through the unit’s touchscreen
or through the web portal, and retrieved by using a USB storage device or by connecting a printer.
9.1
Retrieving Cycle Information Using the Touchscreen
You can always see the last five successful cycles and the last five incomplete cycles, whether you
have a USB storage device attached to the unit or not.
9.2 Retrieving Cycle Information Using the Web Portal
Use the STATCLAVE Web Portal to access all the cycle information stored on your STATCLAVE from
your computer. If your STATCLAVE was not connected to a network during the initial installation, follow
the instructions in Section 2.4 Connecting your STATCLAVE to a network.
9.3
Retrieving Cycle Information Using the USB Data Back Up
The USB storage device can be used to transfer cycle information stored in the unit to a computer.
Best practice suggests this should be done once a week.
To transfer data using the USB port,
follow these steps:
The unit will record the last five successful cycles and the last five incomplete cycles (incomplete
cycles will be identified with a CF number).
If you select a cycle from the list, it will display cycle information
in a format similar to how it would be printed.
Press the USB
icon.
Press on a cycle
information
button to see its
details.
1.
2.
Insert the USB
storage device
into the USB
port.
1.
2.
3.
4.
IMPORTANT!
Data stored in the internal memory of the STATCLAVE can only be copied once.
Data that has been previously transferred will not be re-saved onto a new USB storage device.
You can access previously transferred information from your STATCLAVE G4’s Web Portal.
Press the USB
icon.
Press the
Copy icon.
Press OK to
copy cycle
data to the
USB device
inserted.