39
8.1 Setting Up Load Traceability with User ID, PIN and Process Enforced
Usage
Process Enforced Usage keeps track of who has started and who has removed a load from your
STATCLAVE. It does this by prompting users to enter a PIN at the start of a cycle, when they stop or
cancel a cycle, and when they remove a load. Process Enforced Usage does not restrict any functions,
it is simply a means of tracking whether a registered user or unregistered user was operating the unit.
Process Enforced Usage in DOCUMENTATION mode prompts the user to enter information about the
load type and indicators used to collect additional data that is stored with the cycle’s record. For the
Process Enforced feature to function, User IDs and PINs must first be assigned.
To set up a User ID and PIN, select
then
and follow these steps:
To turn Process Enforced Usage ON or OFF, or to activate DOCUMENTATION mode, select
then
and follow these steps:
Select a User
icon to assign it
a PIN. There are
20 User icons to
choose from.
Using the
keypad, assign
a PIN of up
to four digits.
Press
EN
to
save. Press
to move to the
confirmation
screen.
If all of the
information
presented in
the confirmation
screen is correct,
press
OK
to be
returned to the
USER screen.
1.
3.
5.
2.
4.
To make a correction, select the PIN
User you want to change and repeat the
process described above.
Press
to save your
change and
return to the
main menu.
1.
3.
2.
Use the arrows to
select
ON
,
OFF
or
DOCUMENTATION
.
4.
Any user can stop a cycle and remove the load even with the Process Enforced feature ON. However, the
cycle data will record that an unregistered user has stopped the cycle and/or opened the door.