37
8. Using and Changing Settings
The STATCLAVE user menu provides you with access to settings that can be adjusted or
changed.
The chart below offers an overview of where these settings can be found within the
menu structure and tells you what you can do with each button. Functions such as setting up load
traceability, User IDs and PINs, setting drying times and Stand-by mode are explained in more detail
later in this chapter.
To access this menu from the home screen, select
then
.
Use the
UP
and
DOWN
arrows
to navigate the menu. Press on a button to make a selection. Press the
BACK
button to move to a
previous screen when navigating the menus. After changing a setting, press the
BACK
button to save
your selection.
USER MENU BUTTONS SUBMENU BUTTONS
WHAT TO DO WITH IT
General
Time
Enter values
Date
Enter values
Set Time Zone
Select zone
Time Update
Select automatic or manual
Time 12/24
Select 12-hour or 24-hour format
Date Format
Select how date is displayed
Country
Type name to select country
Units
Select metric or imperial
Language
Select from language list
Unit No.
For users with multiple units
Printer
Printer Type
Select serial or no printer
Baud Rate
For printer adjustments
End of Line CR/LF
For printer adjustments
Printer user ° char
For printer adjustments
Process
Enforced
Select ON, OFF or DOCUMENTATION
User
Create User ID and PIN. Up to 20
users.
Screen
Screensaver
Adjust the time delay for the
screensaver.
LCD Contrast
Adjust LCD readability
Cycle Run
Select circle or chart graphic to
display during a cycle
Network Setup
Network
Select WiFi or wired connection
Automatic IP (DHCP)
Network connection
Renew IP
Network connection
