30
5.
Close the door
Close the door by locking the handle into
position. When you close the door, you
will hear the sound of the vacuum system
adjusting chamber pressure to seal the door.
This is a normal operating sound.
6.
Select the cycle
From the LCD, select the cycle you want to
run. To learn more about the available cycles,
see Section 7. Sterilization Cycles. Press the
icon to see the cycle name and parameters.
7.
Press start
Allow the
cycle to run to
completion.
If the chamber
is cold,
warming up
can take up to
12 minutes.
If User PIN ID has been enabled
, you will be prompted to enter your User ID and PIN before your cycle
selection is accepted.
If there is a problem with the door lock or water
, a PRE-CYCLE SCREEN will appear:
Clean water level is low. Add water.
There is a water quality problem. Press icon to view detail.
Waste water level is low. Add water.
There is a problem locking the door. Check for instruments
jamming the door.
