Colortrac SmartLF Ci 40, Service Manual

Page: 62 / 101

Page 62
Ci Scanner Service Manual
23. When sticking the cables
back down in the same
position as they were before,
make sure the folds are in the
same place, and no cables
will be pulled out when the
CIS Plate Assembly is in the
raised position.
Line the first fold in the cable
with the slot to the main
board, and work your way
back towards the CIS.
24. Do not overlap the cables
along the same route. Each
cable should run separately
through the chassis to the
Main Board. The CIS cables
need to be routed over and to
90 degrees to any other
cables leading to the Main
Board.
25. Feed the CIS ribbon cables
through the appropriate slots
back into the Main Board
compartment.
To
Digital Board
To CIS
Arrays