Colortrac SmartLF Ci 40, Service Manual

Page: 44 / 101

Page 44
Ci Scanner Service Manual
4. Peal the backing off the
tape from the replacement
Mylar strip. Only peal it
back by a few inches; do
not fully remove the
backing tape completely.
5. Position the Mylar strip to
the lid assembly, so the
edge of the Mylar is
against the ridge of the lid
assembly, and the end of
the Mylar is level with the
end of the lid assembly.
6. Peal all the backing tape
off, and making sure the
Mylar is hard against the
ridge of the Lid Assembly,
stick the Mylar fully in
place. If the Mylar is longer
that the lid, cut to length.