Colortrac SmartLF Ci 40, Service Manual

Page: 50 / 101

Page 50
Ci Scanner Service Manual
4. Remove the 6 x self-
tapping screws holding the
control board to the
bracket.
5. Remove the board from
the bracket. If the control
board is being replaced,
the ID chip in the board
must be removed and put
into the replacement board
first. The ID chip must stay
with the scanner.
6. Use a small screwdriver to
prise the ID chip out of the
socket and fit the correct way
round in the new control board.
7. Refit the control board
back into the bracket,
making sure it is the
correct way round, replace
the 6 x Self-tapper screws.