Colortrac SmartLF Ci 40, Service Manual

Page: 59 / 101

Page 59
Ci Scanner Service Manual
14. Lift the complete CIS Plate
Assembly from the
Scanner.
14. If an individual CIS is to be
removed and replaced,
remove the 4 x Hex Head
Locating pins, (as if a
screw) holding the CIS in,
and remove the CIS, with
the cable, from the front of
the Plate Assembly.
15. If only the CIS cable is to be
replaced, it is
recommended taking the
CIS out of the Plate
Assembly, as shown
previously. Gently pull the
locking plate out to release
the cable, replace the cable
and close the locking plate
again. Making sure the
cable is the correct way in
the connector.
NOTE: It is recommended that a new
CIS is fit with a new CIS cable.